Our Products

Fuel

Push lifter

This product makes it easier to open and close the fuel cap when filling gas. The cap can be opened easily by pushing.

Filter

This product is attached to the top of the pump that sucks up the fuel from the tank to screen out dirt and particles from the fuel. Demands for high performance filters are increasing in the recent years as electronic control is deployed for fuel injection systems.

Valve

This product is attached to fuel tanks to prevent fuel leaks when the vehicle is turning or tumbling. Products preventing overfilling are also available.

Baffle plate

This product is a silencer plate installed inside the fuel tank to reduce the noise caused by the movement of fuel when the vehicle is turning or decelerating. The product is commonly used in recent years as the hybrid vehicles and engine stop-start systems are becoming popular.

Nipple

This product is attached on the surface of the resin tanks. The product ejects the air in the tank when filling gasoline. Demands for this product have been increasing to improve environmental performance.

Lock nut

This product is a resin nut to attach the pump module onto the tank. Nifco's sophisticated technology is utilized to create this important security part to directly attach to the fuel tank.

Engine

Engine oil separator

This product prevents a rise of air pressure in the engine oil while the engine is running. The product separates the engine oil and pressurized air to improve the environmental performance of the vehicles.

Engine oil strainer

This product removes particles in engine oil using an internal filter to make sure that the engine runs smoothly. Quality of this product is strictly controlled since its plays an essential role in the vehicle's operation.

Actuator Inlet

This product removes particles in brake fluid using an internal filter to output the clean fluid.

Exterior

Clip

Among the numerous Nifco products, the variety of clips is particularly extensive. They are used in various ways to connect one thing to another.

Clamp

This product aligns and holds in place pipes and hoses. Like with clips, this product features a wide variety. It is used in wide-ranging areas, from the engine room to interior.

Fender seal

This product covers joints of glasses, fenders, and cowl louvers. The product improves the appearance and aerodynamic performance, thus contributing towards the vehicles' marketability.

Bumper retainer

This product fastens the bumper cover to the body while maintaining the even gap between them. Although this product is not visible from outside, it is an essential part for vehicles.

Screw grommet

This product simplifies the task that formerly had to be carried out from both the front and reverse sides using bolts and nuts, so as to be done from only one side. It is one of the production efficiency improvement items in which Nifco takes great pride.

Glass holder

This product connects the glass on the door and the regulator unit. It is designed to fasten tightly and the size of the product is strictly controlled.

Hole Plug

This product plugs holes on the body. The product is soundproof, odor-proof, and waterproof to ensure the quiet environment inside of the vehicle.

Cushion rubber

This product prevents interference with the body when closing the hood or trunk. Nifco utilizes soft resin to reduce the cost of the vehicle.

Shock absorber

This product absorbs shock from the side collision to protect the people in the vehicle. Nifco utilizes resin to reduce the weight of the vehicle.

Interior

Cup holder

This is surely the most familiar among Nifco's automotive products. Since the product is carefully designed to be user-friendly and to give a luxurious feel, it boasts high user satisfaction.

Air vent

This composite product is installed at the air outlet of the air conditioner. Nifco has fine-tuned even the smallest movement and design of the product.

Sun-visor holder

This product holds the sun visor that protects the driver's eyes from direct sunlight. It is designed for the driver to easily attach and detach the sun visor, as well as with considerations to the temperature.

Assist grip

This product is a handgrip to provide stable support for getting in and out the vehicle, or while the vehicle is moving. The product has an internal damper and is designed with the concept of motion control to give a luxurious feel.

Clip as alternatives to Hog rings

This product is a metal ring that fastens the seat upholstery, pad, or pad support to the seat frame and seat spring. Nifco achieved this function with resin clips to improve the production efficiency and reduce its weight.

Center console lid

This product is installed between the driver's seat and the passenger's seat. Nifco's product is capable of technical movements to give a luxurious feel and improve marketability.

Sunglass holder

This product is a holder for sunglasses. The product securely holds sunglasses that normally have nowhere to stay and tend to get lost, and also makes the interior tidy.

Tether clip

This product fastens the pillar garnish. The product prevents the pillar garnish from hitting the passenger when the side air bag is inflated in the event of a crash.

Seat hook

This product enables the rear seat to be secured to the car body through a one touch method. This hook can function at both assembly and dis-assembly times.

Glove compartment damper

This product makes the glove compartment open quietly and slowly. This movement gives a luxurious feel to improve the vehicle's marketability.

Electrical Component

ECU BOX

It has become common for engine control units to be installed in vehicles in recent years. Nifco develops and provides products based on its highly sophisticated fastening technologies.

Clearance sonar retainer

This product fastens the sensor on the bumper cover that measures the distance between the vehicle and obstacles. The size of the product is strictly controlled and the product works as part of the sensor.

Automotive Parts New Parts Developed